CONGRATULATIONS ! YOUR ORDER IS ELIGIBLE FOR FREE Delivery.
ESTIMATED DELIVERY BETWEEN and .
PEOPLE ARE LOOKING FOR THIS PRODUCT
How to use it
step1 : Please charge your new device for at least 10 minutes or more before the first usage, this ensures normal device boot and optimal operation.
step 2 : Power on ( long-press 5-7 sec this button to power on ) tips : long-press button you can Switch to power on /off page , back to home
step 3 : download app ,Before use, scan the QR code in the manual to download the application and connect it to the watch using the application,and then Bind Bracelet ,(first time open APP ,click bind bracelet )
step 4: open phone bluetooth ; search bluetooth in APP ,and connect bluetooth
step 5 : once your bleutooth has been connected, the Data will be Sync , and watches time will Sync with your phone
step 6: you can click mine ,to fill in your information
step 7: you can click device management , setting call reminder / message reminder etc function （For details, please refer to the product manual inside the package）
The relevant QA
Q: Why is the blood pressure value deviated from the sphygmomanometer? A: The deviation between the measurement value of the watch and the sphygmomanometer is determined by a variety of factors. The measurement site of the sphygmomanometer is in the radial artery, and the measurement site of the watch is the two main branches of the arteriole. Normaly, the aortic blood pressure measurement and the arteriole Blood pressure measurements will vary by three to forty; if you use a watch and a sphygmomanometer to measure at the same time, because the blood ﬂows in the artery in the direction of the centrifuge, the sphygmomanometer measures the straps so that the lower part of your elbow is under pressure. Temporary blood cannot ﬂow smoothly to the branch of the artery below, and the vascular tension is increased, which will make the upper and lower blood pressure measurement values more biased.
Q: Why can't the watch receive the message push? A: Android phone settings 1. Conﬁrm that the message push switch is enabled on the mobile client. 2. The conﬁrmation message can be displayed normally in the mobile phone notiﬁcation bar. The watch message push is pushed by reading the mobile phone notiﬁcation bar message; if there is no message in the mobile phone notiﬁcation bar, the watch will not be able to receive the push(need to ﬁnd the notiﬁcation setting in the phone settings, open WeChat, QQ phone, SMS, notiﬁcation button of mobile client) 3. Open the auxiliary function settings of the wristband client(see the auxiliary function in the settings on the phone, and open the auxiliary function settings of the wristband client) Apple phone settings: 1. Conﬁrm that the message push switch is enabled on the mobile client. 2. the conﬁrmation message can be displayed normally in the mobile phone notiﬁcation bar(need to ﬁnd the notiﬁcation settings in the phone settings, open WeChat, QQ phone, SMS, mobile phone client notiﬁcation switch)
Q: Why does the pedometer not count steps when I have already started walking? A: To reduce errors, smart watch usually sets an initial value of 10, it will count steps when we walk more than 10 steps. The APP will show the real walking steps and start counting from step 10.
Q: What application is used when connecting to a smart phone? A: App is "wearfit 2.0",The app is designed by the supplier. You can scan the QR code on the package or manual to download it when you get the item.
Q: Why the device cannot boot or start up properly? A: Please charge your new device for at least 10 minutes or more before the first usage, this ensures normal device boot and optimal operation. For devices with removable batteries, ensure they are properly installed before charging.
Q: Can not find device when pairing device? A: Please make sure the distance between phone and device less than 0.5m Please make sure the device is not under low battey.if there is still problem after 1.5hours charging,Please cantact us.
Q: Can not connect the devicewith app? A: Some smart phone bluetooth service will be abnormal when reboot.Please reboot the smart phone for pairing device.
Q: Why the android mobile disconnect? A: Android mobile phone system memory management will be forced to turn off the background app,you need to turn off the power saving mode or pull the app into the ayatem housekeeping green background inside,app will not be forced to close.app must be running in the background,bluetooth will not automatically disconnect.
For the problem that the bracelet can measure the heart rate in things and in the air, the following explanation is made: 1. At present, the mainstream heart rate bracelets on the market adopt the same measurement method. The principle is not complicated, that is, the PMG signal of the radial artery is obtained by the reflective photoelectric measurement method, and the fast Fourier transform is performed on the PPG signal to analyze the frequency domain. To achieve the detection of the human heart rate. To put it simply, it is to use a light to the artery and then reflect it back. Based on the change of the reflected light, the heart rate of the human body is calculated. 2. Due to many factors such as the physiological structure of the human body, the color of muscles and blood, green light is the color with the highest passing rate in the human body. Therefore, the light source of the heart rate sensor uses green light to achieve minimum loss and interference. 3.Heart rate wristband detection focuses on human tissue. Some data is also read for non-human objects. This is a known and normal phenomenon. After the data is based on the principle of light reflection, the heart rate detection will have a reading. This situation cannot be All avoided, so there will be problems with heart rate data in the case of heart rate bracelet (table) in the case of "air test".
Shipping & Returns
All orders will be shipped if it is available at the time. Products will be sent out within 1-5 business days.
Due to the intimate nature of the products, we are not able to accept returns or exchanges for purchased products unless defective. This is for health and sanitary reasons.
If there is an issue and your product is defective and still under warranty we can help you out by giving you the contact information for the manufacturer.
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.Then contact your credit card company, it may take some time before your refund is officially posted.Next contact your bank. There is often some processing time before a refund is posted.If you’ve done all of this and you still have not received your refund yet, please contact us at firstname.lastname@example.org